Factory Training and Certification Program
Northern Power 100 - Factory Training and Certification Program
Thank you for your interest in the NPS 100 - Factory Training and Certification Training Program.
Installation Training Course
If you are a construction / project manager, site superintendent, lead installer or wear several hats then this course is for you.
The core objective is to prepare project leaders to effectively manage and execute the installation of a NPS 100 on time and budget. This course is required for any organization prior to an initial install.
- Click here to download the Installation Training Course Outline
- Cost is $3500 per participant.
Earning Installer Certification
Successful completion of the installation training courses is only the first step towards Installer Certification. At the completion of the training the participant will be will issued a certificate documenting they are NPS 100 Factory Trained Installers.
After two successful installations, participants may earn their NPS 100 Installer Certification.
Factory Training and Certification for the Service Technician
These classes are for technicians who will be servicing and maintaining the NPS 100. Each participant will complete an open book exam at the end of each class.
Upon successful completion of the class and passing the open book exam - the participant will receive either their Level 1 Technician or Level 2 Advanced Technician Certification.
- Click here to download the Operations & Maintenance Level 1 Technician Course Outline
- Cost is $500 per participant.
- Click here to download the Operations & Maintenance Level 2 Advanced Technician Course Outline
- Cost is $1050 per participant
Class Schedule
2012 Course Schedule |
|||
|
Installer Training |
Level 1 O&M |
Level 2 O&M |
Month |
|
|
|
April |
Mon 4/16 – Tues 4/17 |
Wed 4/18 |
Thurs 4/19 – Fri 4/20 |
June |
Mon 6/4 – Tues 6/5 |
Wed 6/6 |
Thurs 6/7 – Fri 6/8 |
August |
Mon 8/13 – Tues 8/14 |
Wed 8/15 |
Thurs 8/16 – 8/17 |
October |
Mon 10/15 – Tues 10/16 |
Wed 10/17 |
Thurs 10/18 – Fri 10/19 |
December |
Mon 12/6- Tues 12/7 |
Wed 12/8 |
Thurs 12/9 – Fri 12/10 |
Please e-mail your training requests to info@northernpower.com
In the e-mail subject line please enter "NPS Training Request"
Class Cancellation Policy:
If low enrollment should occur, Northern Power Systems may cancel classes up to 10 calendar days from their start date. We suggest that you hold on purchasing any airline tickets until the class is confirmed to run. The participant is responsible for any and all costs associated with travel and lodging.
Climbing Safety Policy:
Since we have a NPS 100 within a short 10 minute drive from our Barre site, we can take participants for a climb up to the nacelle - weather permitting.
Safety is paramount so in order to climb you will have to meet the following criteria:
- You have been trained in industrial climbing and are "authorized" to work at heights.
- When you enroll, provide a copy of your certification card from an industrial climbing organization or if training was done in house - a letter from your employer.
- You will have to provide your own full body harness, with lanyards, and climbing helmet.
How do I enroll? How do I pay?
Download these three documents. Carefully review the Course Outlines and Registration Package and you will get the answers to the above questions and more!
- Factory Training and Certification Course Outlines and Registration Package
- Mutual Confidentiality Agreement
- Liability Waiver
We cannot hold slots or confirm registration until all forms have been submitted and payment has been received. Please remit payment directly to the contact person listed in the registration package. Once all your forms have been submitted and payment has been received we will send an e-mail confirming registration.
Please feel free to contact us with any questions.
Northern Power Systems
1-877-90-NORTH
1-802-461-2955
For your convenience here are driving directions to Northern Power Systems as well as a list of suggested lodging options within the vicinity of our facility. For travel arrangement purposes, you can expect classes to wrap up around 4:00pm on the last day of your course.
Learn the art and science of blade pitching at one of the installation training courses!
The course content and design has been developed for those who are skilled at running construction projects and doing the hands on work.
